Cloth-self-feeding Mini Hand Ami Sewing Machine is useful for mending rip, fray and rents in garments. You want only up-down motion like a stapler to sew with this machine. Proper way to hold mini hand sewing machine the machine with your right hand, placing the thumb on top of the machine with the fingers supporting the bottom. Machine the threading Insert a Bobbin filled with thread through loop-1 and loop-2 (even as the use of an spool so not lead the thread through loop-1 and lead direct to loop-2) then through the tension adjusting discs. Next pull the thread further and guide it through the hook near the needle’s back. Now guide the thread through the needle from right to left with the help of the Threader Through the needle from right to left with the help of the Threader. Positioning the cloth Raise the cloth fastening plate with your right-hand’s forefinger and place the cloth under the Fastening plate. Adjusting thread tension The cloth self-Feeding system adopted on this Hand Sewing Machine feeds the cloth and stitches in proper tension automatically. Alternatively, a couple of helpful hints. ->If stitching is too tight, turn Tension Nut somewhat to left. ->If stitching is too loose, turn Tension Nut somewhat to right. Sewing operation Hold the left end of cloth with your left hand and press the needle into the cloth the entire way by gripping the machine gently as you move the machine to the right even as pulling the cloth somewhat to the left. How to set a spool on the machine If bobbin gets empty or some other
★ Tighten the Needle Screw firmly. (use a small screw driver to ensure tighter grip).
★ Cloth-self-feeding Mini Hand Sewing Machine is useful for mending rip, fray and rents in garments. You want only up-down motion like a stapler to sew with this machine.
★ Two Speed Keep watch over, Sew the Sleeves Easily. At all times use “DH 1*1″14 Needle. A single press will yield one stitch.
★ Continue the process until the damaged portion of the cloth is hemmed.
★ To finish stitching pull out the thread’s end about 2 inches over the cloth towards the left and cut the thread with scissors. After pushing down the needle and raising it up lift the cloth fastening plate with your right hand forefinger and pull out the cloth to the left.To keep both needle and cloth secure confirm that the needle is not in the cloth.